Skip to main content

Raymarine EV-200 Power Evolution Autopilot (T70156)

(0)No Reviews yet
SKU: T70156

In Stock


EV-200 Power Evolution Autopilot, Evolution Ai for superior performance, No calibration required, Use with any Type 1 Hydraulic Pump (sold separately), 12V or 24V DC operation. SeaTalk ;Network Capable, ACU-200 auxiliary power to SeaTalk ;network, Includes p70R Autopilot Controller. Also includes EV-1 Sensor Core, p70R Autopilot Control Head, ACU-200 Actuator Control Unit (Includes the M81105 Rotary Rudder reference). Evolution Cabling Kit, EV Unit O-ring Pack (set of 2), Wall Mounting Bracket.

The EV Sensor Core: At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to install housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalk ;networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalk ;and NMEA2000 networks.

p70R Autopilot Control Head: The p70R has a convenient rotary control knob and support for multiple autopilot modes including Auto, standby, trolling patterns, and track mode from your GPS or chart plotter. ;Lighthouse user interface is simple and quick to use, Wide 160° viewing angles, Startup wizard helps you configure the pilot quickly and easily, Anti-reflective coating for improved visibility in bright sunlight, Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness. Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer, Simple system and group dimming/illumination, Support for multiple data sources, SeaTalk/NMEA2000 and SeaTalk1 connectivity (no bridging required).

ACU-200 Autopilot Control Unit (ACU): The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalk ;bus. Choose the ACU that fits your steering system type. Support Drive Units: Type 1 Drive Unit (sold separately), Evolution Cabling Kit - 1 x SeaTalk ;Power Cable (0.4m), 1 x SeaTalkg Backbone Cable (5m), 1 x SeaTalk ;Spur Cable (0.4m), 1 x SeaTalk ;5-way Connector Block, 2 x SeaTalk ;T-piece Connector, 2 x SeaTalk ;Terminator.

Key Features:

  • Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change
  • Flexible installation options, mount above or below deck
  • Simple SeaTalk ;connectivity to the control head and ACU, solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
  • Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays


Ratings & Reviews

No reviews available

Be the first to Write a Review